process parameters
英 [ˈprəʊses pəˈræmɪtəz]
美 [ˈprɑːses pəˈræmətərz]
网络 选取处理参数; 处理参数; 工艺参数; 过程参数; 程参数
双语例句
- Confirming the better process parameters, the effect of the PTEE during the milling process was also discussed.
并确定了较好的工艺参数，初步探讨了聚四氟乙烯在球磨过程中的作用。 - The result is helpful to the selection of process parameters during the process of flat tube in-plane rotary bending.
研究结果对扁管面内绕弯成形过程工艺参数的选取，提供了理论依据。 - Through precise control of welding process parameters, one-side welding enameled wire to copper foil is realized.
通过对焊接工艺参数进行精密控制，实现了铜箔漆包线的单面直接焊接。 - According to the regressive equation being presented and the simulation results, the effect rules of process parameters on the ovality and optimal combination of process parameters were obtained.
依据回归方程和模拟结果，得出了工艺参数对等内径空心轴椭圆度的影响规律，以及各因素对椭圆度的影响程度主次和工艺参数的最优组合。 - Choose spraying process parameters are the main principles of the coating and improve the bonding strength of the substrate.
选择喷涂工艺参数的主要原则是提高涂层与基材的结合强度。 - A brief sum-up is made of the process flow, process parameters and operation of the ammonia stilling.
对蒸氨装置的流程、工艺参数、运行情况进行简要总结。 - Monitoring and control of suitable process parameters and product characteristics;
监督与控制合适的过程参数和产品特性； - Laser hardening process and machining process parameters for tablet punch pin have been studied.
对药物冲头零件采用激光淬火及其淬火后机械加工工艺参数优化进行了综合研究。 - The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。 - The influence of the process parameters on electron beam melting process is investigated and a mathematic model is set up by linear regression analysis.
研究了工艺参数对电子束熔融工艺过程的影响，采用线性回归分析建立了一个数学模型。 - The effect of different heat treatment process parameters on mechanical properties of LD10 alloy after forging was investigated.
研究了不同热处理工艺参数对LD10合金锻造后力学性能的影响。 - It includes the selection of the process, calculation of process parameters and selection of major equipment, etc.
包括工艺流程的选择、工艺参数的计算、主要设备的选型等。 - Different process parameters were employed in this paper to experiment on ion nickelizing by double glow discharge.
采用不同的工艺参数对工业纯铁进行了离子渗镍试验。 - Based on the determination of optimal process parameters, the agitator, the key component of the gravity separator, was optimized.
在确定了最佳的工艺参数基础上，对其中的关键部件搅拌器进行了优化设计。 - And this kind of control of the process parameters on the product quality are almost play a decisive role.
而且这类工艺参数控制对产品质量几乎起决定性的作用。 - The effects of several process parameters on lipid adsorption rate and COD of treated water were examined.
讨论了影响脂质吸附率和处理后废水COD的几个因素。 - Process control includes process parameters, process-related special characteristics, machines, jigs, fixtures, tools for manufacturing.
过程控制包括过程参数、与过程有关的特殊特性、机器卡具夹具制造用工具。 - An approach to the optimization of process parameters for manufacturability of machined parts;
介绍了一种较为先进的光罩可制造性规则检查的方法及其系统构成。 - Record and monitor the process parameters and product properties, which may affect the suitability of quality.
对影响质量适宜的过程参数和产品特性进行记录和监控。 - One of the key problems for thermomechanical treatment of aluminum alloy is how to determine the process parameters.
如何正确地选择和控制工艺方案及其参数，是影响铝合金形变热处理效果的一个关键因素。 - If the operator in the process of a detailed record of process parameters;
如操作人员在加工过程中详细记录工艺参数； - The effects of the grinding process parameters on the wet-type grinding temperature field were obtained.
从而得出了钛合金主要磨削参数对湿式磨削温度场的影响趋势。 - According to the performance characteristics of three materials, process parameters and technological measures of each procedure are discussed.
针对三种纤维原料的性能特点，探讨了各工序的主要工艺参数和技术措施。 - When the process parameters are not appropriate, the oxide and impurity congregate between the layered microstructures.
当工艺参数不恰当时，该区域层间易产生氧化物和杂质物的富集。 - The paper studies this pin technology and covers the analysis of printed circuit board strain and process parameters optimization.
文章以该插针工艺为研究主体，涵盖了线路板应力分析和工艺参数的优化过程。 - Monitoring and control of process parameters and component and device characteristics during production;
监测和控制工艺参数和元件及装置特点，在生产； - By use of this model, the effects of process parameters on the width of columnar grain zone were studied.
应用建立的微观组织模型，研究了三种工艺参数对柱状晶区宽度的影响。 - And the optimal combination of process parameters of minimum contraction is obtained.
并获取了使得收缩最小的最优工艺参数组合。 - Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover.
并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。